Specifications

SSR Command Line Interface Reference Manual 799

Chapter 53

snmp Commands

The SNMP commands let you set and show SNMP parameters including SNMP

community names and IP host targets for SNMP traps.

Command Summary

Table 38 lists the snmp commands. The sections following the table describe the command

syntax.

Table 38. snmp Commands

snmp disable trap authentication|link-up-down

snmp set chassis-id <chassis-name>

snmp set community <community-name> privilege read|read-write

snmp set target <IP-addr> community <community-name> [status enable|disable]

snmp stop