Specifications

smarttrunk show
798 SSR Command Line Interface Reference Manual
Restrictions
None.
Examples
To display information about all SmartTRUNKs on the SSR:
To show how traffic is distributed across the ports on SmartTRUNK st.1:
To show information about the control protocol for SmartTRUNK st.1:
To show connection information for all SmartTRUNKs:
Note:
In the example above, SmartTRUNK st.2 has no control protocol enabled, so no
connection information is reported.
ssr# smarttrunk show trunks
Flags: D - Disabled I - Inactive
SmartTRUNK Active Ports Inactive Ports Primary Port Protocol Load-Policy Flags
---------- ------------ -------------- ------------ -------- ----------- -----
st.1 et.3.(7-8) None None RR
ssr# smarttrunk show distribution st.1
SmartTRUNK Member Port Total (bytes/sec) Port (bytes/sec) % Load
---------- ----------- ----------------- ---------------- ------
st.1 et.2.4 7660268 2872592 37
st.1 et.2.5 7660268 1915084 25
st.1 et.2.6 7660268 2872592 37
ssr# smarttrunk show protocol-state st.1
SmartTRUNK Protocol State Port Port State
---------- -------- ----- ---- ----------
st.1 HuntGroup Down et.3.1 Negotiate
et.3.2 Negotiate
ssr# smarttrunk show connections all-smarttrunks
SmartTRUNK Local Port Remote Switch Remote Module Remote Port State
---------- ---------- ------------- ------------- ----------- -----
st.1 et.2.1 Cabletron A9:6E:57 3 1 Up
st.1 et.2.2 Cabletron A9:6E:57 3 2 Up
st.1 et.2.3 Cabletron A9:6E:57 3 3 Up
st.1 gi.3.1 Cabletron A9:6E:57 4 5 Up
st.2 et.2.4 -- -- -- Up
st.2 et.2.5 -- -- -- Up
st.2 et.2.6 -- -- -- Up