Specifications

SSR Command Line Interface Reference Manual 797
smarttrunk show
smarttrunk show
Purpose
Displays information about SmartTRUNKs on the SSR
Format
smarttrunk show trunks
smarttrunk show distribution|protocol-state|connections <smarttrunk list>|all-
smarttrunks
Mode
Enable
Description
The smarttrunk show command shows statistics about SmartTRUNKs on the SSR.
Parameters
trunks Shows information about all SmartTRUNKs, including active and
inactive ports, and the control protocol used.
distribution Provides statistics on how traffic is distributed across the ports in a
SmartTRUNK.
protocol-state Shows information about the control protocol on a SmartTRUNK.
connections Shows information about the SmartTRUNK connection, including
the MAC address of the remote switch, and the module number and
port number of each remote port. Connection information is reported
only if the Hunt Group protocol is enabled for the SmartTRUNK.
<smarttrunk list > Is the name of one or more SmartTRUNKs.
all-smarttrunks Specifies that the command be applied to all SmartTRUNKs.