Specifications

smarttrunk create
794 SSR Command Line Interface Reference Manual
Hunt Group control protocol (that is, a device from a vendor other
than Cabletron or DIGITAL).
huntgroup Specifies that the DEC Hunt Group control protocol be used. Use this
keyword if you are connecting the SmartTRUNK to another SSR,
Cabletron switch, or Digital GIGAswitch/Router.
Restrictions
None.
Example
The following command creates a SmartTRUNK named st.1, using the DEC Hunt Group
control protocol.
ssr(config)# smarttrunk create st.1 protocol huntgroup