Specifications

smarttrunk add ports
790 SSR Command Line Interface Reference Manual
smarttrunk add ports
Purpose
Adds physical ports to a SmartTRUNK.
Format
smarttrunk add ports <port list> to <smarttrunk>
Mode
Configure
Description
The smarttrunk add ports command allows you to add the ports specified in <port list> to
a SmartTRUNK. The SmartTRUNK must already have been created with the smarttrunk
create command. The ports in the SmartTRUNK must be set to full duplex.
Parameters
<port list> Is one or more ports to be added to an existing SmartTRUNK. All the
ports in the SmartTRUNK must be connected to the same destination.
<smarttrunk> Is the name of an existing SmartTRUNK.
Restrictions
Ports added to a SmartTRUNK must:
• Be set to full duplex
• Be in the same VLAN
• Have the same properties (L2 aging, STP state, and so on)