Specifications

SSR Command Line Interface Reference Manual 79
Chapter 3
aging Commands
The aging commands control aging of learned MAC address entries in the SSR’s L2
lookup tables or layer3/4 flows. Using the aging commands, you can show L2 or layer
3/4 aging information, set or disable L2 aging on specific ports, set or disable aging of
layer 3/4 flows, or set or disable NAT or LSNAT flows.
Command Summary
Table 3 lists the l2 and l3 aging commands. The sections following the table describe the
command syntax.
Table 3. aging commands
aging l2 disable <port-list>|all-ports
aging l2 set aging-timeout <seconds> port <port-list>|all-ports
aging l2 show status
aging l3 set timeout <seconds>|disable
aging l3 set nat-flow-timeout <minutes>|disable
aging l3 show status