Specifications

sfs set cdp-hello transmit-frequency
782 SSR Command Line Interface Reference Manual
sfs set cdp-hello transmit-frequency
Purpose
Specify how often CDP Hello packets should be sent.
Format
sfs set cdp-hello transmit-frequency <secs>
Mode
Configure
Description
The sfs set cdp-hello transmit-frequency command specifies how often CDP Hello
packets should be sent. The interval is specified in seconds. The default transmit
frequency is one packet every 5 seconds.
Parameters
<secs> Specifies the interval in seconds between the transmission of CDP
Hello packets. Acceptable value is 1-300. Default is 5 seconds.
Restrictions
None.
Examples
To set the transmit frequency to 10 seconds:
ssr(config)# sfs set cdp-hello transmit-frequency 10