Specifications

sfs enable cdp-hello
780 SSR Command Line Interface Reference Manual
sfs enable cdp-hello
Purpose
Enabled the sending of CDP Hello packets.
Format
sfs enable cdp-hello <port-list>|all-ports
Mode
Configure
Description
The sfs enable cdp-hello command enables the sending of CDP (Cabletron Discovery
Protocol) Hello packets. These are special packets sent out periodically by the router to
announce itself to other Cabletron devices or applications. CDP Hello packets can be
enabled to be sent out to all available ports or selected ports only.
Parameters
<port-list>|all-ports Specifies the ports you want to enable CDP Hello packets. The all-
ports keyword enables CDP Hello packets for all the SSR ports.
Restrictions
None.
Examples
To enable the sending of CDP Hello packets on port 3 of slot 1:
ssr(config)# sfs enable cdp-hello et.1.3