Specifications

rmon user-history-control
772 SSR Command Line Interface Reference Manual
rmon user-history-control
Purpose
Monitors a group of objects (OIDs) over a period of time.
Format
rmon user-history-control index <index-number> objects <number> samples <number>
interval <number> [owner <string>] [status enable|disable]
Mode
Configure
Description
The rmon user-history-control command monitors the group of objects that are defined
with the rmon user-history-objects command. This command creates an entry in the User
History control table.
Use the rmon show user-history command to display the User History table.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies a row in the user history
control table.
objects <number>
Specifies the number of MIB objects to be collected.
samples <number>
Specifies the number of discrete time intervals over which data is to be saved.
interval <number>
Specifies the interval, in seconds, between samples.
owner <string>
Specifies the owner of the event; for example, an IP address, machine name or
person’s name.