Specifications

SSR Command Line Interface Reference Manual 769
rmon show status
Example
To show RMON status:
Legend:
1. When the SSR is booted, RMON is off by default. RMON is enabled with the rmon
enable command.
2. Shows which RMON group (Lite, Standard, or Professional) is configured and
whether default control tables are turned on.
3. Shows the ports on which RMON is enabled.
4. Shows RMON memory utilization. You can adjust the amount of memory allocated to
RMON with the rmon set memory command.
ssr# rmon show status
RMON Status
-----------
* RMON is ENABLED
* RMON initialization successful.
+--------------------------+
| RMON Group Status |
+-------+--------+---------+
| Group | Status | Default |
+-------+--------+---------+
| Lite | On | Yes |
+-------+--------+---------+
| Std | On | Yes |
+-------+--------+---------+
| Pro | On | Yes |
+-------+--------+---------+
RMON is enabled on: et.5.1, et.5.2, et.5.3, et.5.4, et.5.5, et.5.6, et.5.7, et.5.8
RMON Memory Utilization
-----------------------
Total Bytes Available: 48530436
Total Bytes Allocated to RMON: 4000000
Total Bytes Used: 2637872
Total Bytes Free: 1362128
1
2
3
4