Specifications

rmon show protocol-distribution
766 SSR Command Line Interface Reference Manual
rmon show protocol-distribution
Purpose
Shows the octets and packets detected for different protocols on a network segment.
Format
rmon show protocol-distribution <port-list>|all-ports
Mode
Enable
Description
The rmon show protocol-distribution command displays the RMON 2 Protocol
Distribution table. This table contains a list of protocols, defined in the RMON 2 Protocol
Directory, that are discovered by the SSR. Entries in this table are created automatically
when default tables are turned on for the Professional group. If you delete an entry in the
Protocol Directory, then entries in this table associated with the deleted protocol are also
deleted.
If CLI filters have been applied, they will take effect when the Protocol Distribution table
is displayed.
Parameters
<port-list>|all-ports
The port(s) for which you want to show protocol distribution. Use the keyword all-
ports to show protocol distribution information on all the ports.
Restrictions
This command is only available if you have configured the Professional group.
Example
To show the RMON 2 Protocol Distribution table: