Specifications

rmon show packet-capture
762 SSR Command Line Interface Reference Manual
rmon show packet-capture
Purpose
Shows packets captured after flowing through a channel.
Format
rmon show packet-capture
Mode
Enable
Description
The rmon show packet-capture command shows the buffer table for captured packets.
Before you use this command, first configure the Filter Channel group using the rmon
channel index command. Then use the rmon capture command to configure the Packet
Capture group which allows packets to be captured after they have flowed through a
channel.
Parameters
None.
Restrictions
This command is only available if you have enabled the Standard RMON groups.