Specifications
SSR Command Line Interface Reference Manual 761
rmon show nl-matrix-top-n
To show the top n entries in the Network Layer Matrix table, as specified by the previous
command:
Legend:
1. Index number that identifies this entry in the network layer Matrix Top N control
table.
2. The Network Layer Matrix table for which the top N report is shown.
3. The parameter on which the entries are sorted.
4. Number of seconds left in the report currently being collected.
5. Number of seconds that this report has collected during the last sampling interval.
6. Maximum number of matrix entries in this report.
7. The time when this report was last started.
8. The number of reports generated by this entry.
9. The entity that configured this entry.
10. Network address of the source host.
11. Network address of the destination host.
12. Number of packets from the source to the destination during the sampling interval.
13. Number of packets from the destination to the source during the sampling interval.
14. Number of octets from the source to the destination during the sampling interval.
15. Number of octets from the destination to the source during the sampling interval.
16. The protocol, as defined in the RMON Protocol Directory for the SSR.
ssr# rmon show nl-matrix-top-n
RMON II Nl Matrix Table
Index M-Index RateBase TimeRem Duration Size StartTime Reports Owner
1 500 Octets 20 20 5 00D 00H 51M 37S 1 Usama
SrcAddr DstAddr PktRate R-PktRate OctetRate R-OctetRate Protocol
------- ------- ------- --------- --------- ----------- --------
192.100.81.3 10.60.89.88 23 0 19986 0 *ether2.ip-v4
192.100.81.1 192.100.81.3 0 0 0 0 *ether2.ip-v4
192.100.81.3 192.100.81.1 0 0 0 0 *ether2.ip-v4
10.60.89.88 192.100.81.3 0 23 0 19986 *ether2.ip-v4
1 2 3 4 5 6
7
8 9
10 11 12 13 14 15 16