Specifications
SSR Command Line Interface Reference Manual 759
rmon show nl-matrix
Restrictions
This command is only available if you have configured the Professional group and control
table entries exist for the specified port.
Example
To show the Network Layer Matrix table for all ports:
Legend:
1. The control table entry for this port:
Index: index number that identifies this entry in the control table.
Port: name of port.
Inserts: number of inserts in the Network Layer Matrix table for this entry.
Deletes: number of deletions in the Network Layer Matrix table for this entry.
Owner: the entity that configured this entry.
2. Source network address.
3. Destination network address.
4. Number of packets transmitted without error from the source to the destination.
5. Number of octets transmitted without error from the source to the destination.
6. The protocol, as specified in the RMON Protocol Directory for the SSR.
ssr# rmon show nl-matrix all-ports
RMON II Network Layer Matrix Table
Index: 500, Port: et.5.1, Inserts: 4, Deletes: 0, Owner: monitor
SrcAddr DstAddr Packets Octets Protocol
------- ------- ------- ------ --------
10.60.89.88 192.100.81.3 2 164 *ether2.ip-v4
192.100.81.1 192.100.81.3 1 100 *ether2.ip-v4
192.100.81.3 10.60.89.88 1241 1025436 *ether2.ip-v4
192.100.81.3 192.100.81.1 1 100 *ether2.ip-v4
Index: 504, Port: et.5.5, Inserts: 2, Deletes: 0, Owner: monitor
SrcAddr DstAddr Packets Octets Protocol
------- ------- ------- ------ --------
10.60.89.88 192.100.81.3 1302 105604 *ether2.ip-v4
192.100.81.3 10.60.89.88 3 246 *ether2.ip-v4
1
2 3 4 5 6