Specifications

rmon show nl-matrix
758 SSR Command Line Interface Reference Manual
rmon show nl-matrix
Purpose
Shows information about the traffic between network address pairs.
Format
rmon show nl-matrix <port-list>|all-ports [order-by srcdst|dstsrc] [summary]
Mode
Enable
Description
The rmon show nl-matrix command shows entries in the Network Layer Matrix table for
one or more ports. Entries in this table are created automatically when default tables are
turned on for the Professional group.
If CLI filters have been applied, they will take effect when this table is displayed. The
control rows and their corresponding logs are displayed only if there are logs. A control
row with no data will not appear in the report.
Parameters
<port-list>|all-ports
The port(s) for which you want to display network layer traffic information. Use the
keyword all-ports to show information for all ports.
order-by srcdst
Orders the logs by source address, then destination address (default).
order-by dstsrc
Orders the logs by destination address, then source address.
summary
Use the keyword summary to display control row summary information only.