Specifications

rmon show nl-host
756 SSR Command Line Interface Reference Manual
rmon show nl-host
Purpose
Shows the amount of traffic to and from each network address.
Format
rmon show nl-host <port-list>|all-ports [summary]
Mode
Enable
Description
The rmon show nl-host command shows entries in the RMON 2 Network Layer Host
table for one or more ports. Entries in this table are created automatically when default
tables are turned on for the Professional group.
If CLI filters have been applied, they will take effect when the Network Layer host table is
displayed. This command shows control rows and their corresponding logs only if there
are logs. A control row with no data will not appear in the report.
Parameters
<port-list>|all-ports
The port(s) for which you want to display traffic information. Use the keyword all-
ports to show information on all the ports.
summary
Use the keyword summary to display control row summary information only.
Restrictions
This command is only available if you have configured the Professional RMON group and
control table entries exist for the specified port.