Specifications

SSR Command Line Interface Reference Manual 753
rmon show matrix
rmon show matrix
Purpose
Shows statistics for source-destination address pairs.
Format
rmon show matrix <port-list>|all-ports [summary] [order-by srcdst|dstsrc]
Mode
Enable
Description
The rmon show matrix command displays entries in the Matrix table. Entries in this table
are automatically created when default tables are turned on for the Standard group.
If CLI filters have been applied, they will take effect when the Matrix table is displayed.
This command will display control r ows and their corresponding logs only if there are
logs. A control row that has no data is not displayed.
Parameters
<port-list>|all-ports
The port(s) for which you want to display information. Use the keyword all-ports to
show matrix information on all the ports.
summary|order by
Use the keyword summary to display the control rows only. Use the keyword order-by to
display entries by source/destination or by destination/source.
srcdst|dstsrc
Use the keyword srcdst to display the entries by source/destination. Use the keyword
dstsrc to display entries by destination/source.
Restrictions
This command is only available if you have configured the Standard group.