Specifications

SSR Command Line Interface Reference Manual 747
rmon show history
Example
To display history information for a specific port:
Legend:
1. Index number that identifies the entry for this port in the History control table.
2. Port name.
3. Interval (in seconds) for data samples for each data bucket.
4. The actual number of buckets/the requested number of buckets.
5. Owner of this entry “monitor” (default).
6. Index number for this data bucket.
7. Time at which the sample was measured.
8. Total number of octets received on the network.
9. Number of packets received during the sampling period.
10. Number of good packets received during the sampling interval that were directed to a
broadcast address.
11. Number of good packets received during the sampling interval that were directed to a
multicast.
12. The number of collisions on this Ethernet segment during the sampling interval (best
estimate).
13. The percentage of the network being utilized (best estimate).
ssr# rmon show history et.5.1
RMON I History Table
Index Port Interval(secs) Buckets Owner
502 et.5.1 300 50/50 monitor
Index SysUpTime Octets Packets Bcst Mcst Colls %Util Other
213 00D 17H 45M 47S 318114 336 0 0 0 0 0
214 00D 17H 50M 47S 323928 341 0 0 0 0 0
215 00D 17H 55M 48S 323586 335 0 0 0 0 0
216 00D 18H 00M 49S 317186 320 0 0 0 0 0
217 00D 18H 05M 49S 323470 333 0 0 0 0 0
.
.
.
258 00D 21H 31M 03S 322264 312 0 0 0 0 0
259 00D 21H 36M 03S 327944 315 0 0 0 0 0
260 00D 21H 41M 04S 333138 309 0 0 0 0 0
261 00D 21H 46M 06S 327782 312 0 0 0 0 0
262 00D 21H 51M 07S 332268 294 0 0 0 0 0
1 2 3 4 5
6 7 8 9
10
11 12 13