Specifications

rmon show al-matrix-top-n
736 SSR Command Line Interface Reference Manual
To show the top n entries in the Application Layer Matrix table, as specified by the
previous command:
Legend:
1. Index number that identifies this entry in the Application Layer Matrix Top N control
table.
2. The Application Layer Matrix table for which the top N report is shown.
3. The parameter on which the entries are sorted.
4. Number of seconds left in the report currently being collected.
5. Number of seconds that this report has collected during the last sampling interval.
6. Maximum number of matrix entries in this report.
7. The time when this report was last started.
8. The number of reports generated by this entry.
9. The entity that configured this entry.
10. Network address of the source host.
11. Network address of the destination host.
12. Number of packets from the source to the destination during the sampling interval.
13. Number of packets from the destination to the source during the sampling interval.
14. Number of octets from the source to the destination during the sampling interval.
15. Number of octets from the destination to the source during the sampling interval.
16. The protocol, as defined in the RMON Protocol Directory group on the SSR.
ssr# rmon show al-matrix-top-n
RMON II Al Matrix Table
Index M-Index RateBase TimeRem Duration Size StartTime Reports Owner
1 500 All-Packets 14 20 5 00D 00H 50M 25S 1 Usama
SrcAddr DstAddr PktRate R-PktRate OctetRate R-OctetRate Protocol
------- ------- ------- --------- --------- ----------- --------
192.100.81.3 10.60.89.88 21 0 19836 0 *ether2.ip-v4.tcp.telnet
192.100.81.3 10.60.89.88 21 0 19836 0 *ether2.ip-v4.tcp
192.100.81.3 10.60.89.88 21 0 19836 0 *ether2.ip-v4
192.100.81.1 192.100.81.3 0 0 0 0 *ether2.ip-v4
192.100.81.3 192.100.81.1 0 0 0 0 *ether2.ip-v4
1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16