Specifications

rmon show al-matrix
732 SSR Command Line Interface Reference Manual
rmon show al-matrix
Purpose
Shows application layer traffic between source and destination addresses.
Format
rmon show al-matrix <port-list>|all-ports [order-by srcdst|dstsrc] [summary]
Mode
Enable
Description
The rmon show al-matrix command shows entries in the RMON 2 Application Layer
Matrix table for one or more ports. Entries in this table are created automatically when
default tables are turned on for the Professional group.
If CLI filters have been applied, they will take effect when this table is displayed. The
control rows and their corresponding logs are displayed only if there are logs. A control
row with no data will not appear in the report.
Parameters
<port-list>|all-ports
The port(s) for which you want to display application layer traffic information. Use
the keyword all-ports to show traffic information for all the ports.
srcdst
Orders the logs by source address , then destination address (default).
dstsrc
Orders the logs by destination address, then source address.
summary
Displays control row summary information only.