Specifications

rmon show al-host
730 SSR Command Line Interface Reference Manual
Restrictions
This command is only available if you have configured the Professional group and control
table entries exist for the specified port.
Example
To show Application Layer Host tables on all ports:
Legend:
1. The control table entry for this port:
Index: uniquely identifies the entry in the control table.
Port: port name.
Inserts: number of Application Layer Host table entries for this port.
Deletes: number of Application Layer Host table entries deleted for this port.
Owner: default owner “monitor.”
2. Network address discovered on the port.
3. Number of packets transmitted without errors to the network address for the
protocol.
4. Number of octets transmitted without errors to the network address for the protocol.
ssr# rmon show al-host all-ports
RMON II Application Layer Host Table
Index: 500, Port: et.5.1, Inserts: 9, Deletes: 0, Owner: monitor
Address InPkts InOctets OutPkts OutOctets Protocol
------- ------ -------- ------- --------- --------
10.60.89.88 1080 879418 2 164 *ether2.ip-v4
10.60.89.88 1080 879418 2 164 *ether2.ip-v4.tcp
10.60.89.88 1080 879418 2 164 *ether2.ip-v4.tcp.telnet
192.100.81.1 1 100 1 100 *ether2.ip-v4
192.100.81.1 1 100 1 100 *ether2.ip-v4.icmp
192.100.81.3 3 264 1081 879518 *ether2.ip-v4
192.100.81.3 1 100 1 100 *ether2.ip-v4.icmp
192.100.81.3 2 164 1080 879418 *ether2.ip-v4.tcp
192.100.81.3 2 164 1080 879418 *ether2.ip-v4.tcp.telnet
Index: 504, Port: et.5.5, Inserts: 6, Deletes: 0, Owner: monitor
Address InPkts InOctets OutPkts OutOctets Protocol
------- ------ -------- ------- --------- --------
10.60.89.88 3 246 1141 92563 *ether2.ip-v4
10.60.89.88 3 246 1141 92563 *ether2.ip-v4.tcp
10.60.89.88 3 246 1141 92563 *ether2.ip-v4.tcp.telnet
192.100.81.3 1141 92563 3 246 *ether2.ip-v4
192.100.81.3 1141 92563 3 246 *ether2.ip-v4.tcp
192.100.81.3 1141 92563 3 246 *ether2.ip-v4.tcp.telnet
1
2 3 4 5 6 7