Specifications

rmon show address-map
728 SSR Command Line Interface Reference Manual
Example
To display the address map log table for all ports:
Legend:
1. The port on which the MAC address-network address binding was discovered.
2. The MAC address for the binding.
3. The network layer address for the binding.
4. The protocol, as specified in the RMON Protocol Directory for the SSR.
ssr# rmon show address-map-logs all-ports
RMON II Address Map Control Table
Port macAdd nlAdd Protocol
---- ------ ----- --------
et.5.1 00001D:CBA3FD 192.100.81.1 ether2.ip-v4
et.5.1 00001D:CBA3FD 192.100.81.1 *ether2.ip-v4
et.5.1 00001D:CBA3FD 10.60.89.88 ether2.ip-v4
et.5.1 00001D:CBA3FD 10.60.89.88 *ether2.ip-v4
et.5.5 00001D:CBA3FD 192.100.81.3 ether2.ip-v4
et.5.5 00001D:CBA3FD 192.100.81.3 *ether2.ip-v4
et.5.5 080020:835CAA 10.60.89.88 ether2.ip-v4
et.5.5 080020:835CAA 10.60.89.88 *ether2.ip-v4
et.5.1 0080C8:C172A6 192.100.81.3 ether2.ip-v4
et.5.1 0080C8:C172A6 192.100.81.3 *ether2.ip-v4
1 2 3 4