Specifications

SSR Command Line Interface Reference Manual 725
rmon set protocol-directory
rmon set protocol-directory
Purpose
Specifies the protocol encapsulations that are managed with the Protocol Directory group.
Format
rmon set protocol-directory <protocol>|all-protocols [address-map on|off|na] [host
on|off|na] [matrix on|off|na]
Mode
Configure
Description
The rmon set protocol-directory command defines the protocols that are managed with
RMON on the SSR.
Parameters
<protocol>
Specifies the protocol encapsulations that are managed with the Protocol Directory
group on the SSR. (See Appendix A for a list of protocols supported on the SSR.)
Specify all-protocols to manage all protocols that are supported on the SSR.
address-map on|off|na
Configures support for the Address Map group for the specified protocol(s).
host on|off|na
Configures support for the Host group for the specified protocol(s).
matrix on|off|na
Configures support for the Matrix group for the specified protocol(s).