Specifications

rmon set ports
724 SSR Command Line Interface Reference Manual
rmon set ports
Purpose
Enables RMON on one or more ports.
Format
rmon set ports <port list>|allports
Mode
Configure
Description
Since RMON uses many system resources, RMON can be enabled on a set of ports. Ports
can be dynamically added and removed from the port list. For example, if default tables
are turned on for the Lite group and port et.2.1 is then added to the port list, an entry for
port et.2.1 is automatically created in the Etherstats and History control tables.
Parameters
<port list>
Specifies the port(s) on which RMON is enabled. Specify allports to enable RMON for
all ports on the SSR.
Restrictions
None.
Example
To enable RMON on all ports on the SSR:
ssr(config)# rmon set ports allports