Specifications

SSR Command Line Interface Reference Manual 719

rmon set cli-filter

Purpose

Defines filters that can be applied to certain RMON groups during a CLI session.

Format

rmon set cli-filter <filter-id> <parameter>

Mode

Configure

Description

You can define filters that CLI users can apply to certain RMON groups. The filters you

define are visible to all users that have a Telnet or Console session on the SSR. Each user

has the choice of whether or not to apply a particular filter using the rmon apply cli-

filters command.

RMON CLI filters only affect the output of the following RMON groups:

• Host

•Matrix

• Network Layer Host

• Application Layer Host

• Network Layer Matrix

• Application Layer Matrix

• Protocol Distribution

The rmon show cli-filters command displays the RMON CLI filters that have been

defined on the SSR.

Parameters

<filter-id>

Is a number between 1 and 65535 that uniquely identifies a CLI filter.