Specifications

rmon protocol-distribution
714 SSR Command Line Interface Reference Manual
rmon protocol-distribution
Purpose
Configures the RMON 2 Protocol Distribution group.
Format
rmon protocol-distribution index <index-number> port <port> [owner <string>] [status
enable|disable]
Mode
Configure
Description
The Protocol Distribution group displays the packets and octets on a protocol and port
basis. The rmon protocol-distribution command sets various parameters of the RMON 2
Protocol Distribution control table. If default tables were turned on for the Professional
group, an entry is created in the Protocol Distribution control table for each available port.
Use the rmon show protocol-distribution command to display the protocol distribution.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies a row in the Protocol
Distribution table.
<port>
Specifies the port from which to collect data.
owner <string>
Specifies the owner of the event; for example, an IP address, machine name or
person’s name.
status enable|disable
Enables or disables this matrix. The default is enable.