Specifications

rmon matrix
710 SSR Command Line Interface Reference Manual
rmon matrix
Purpose
Configures the RMON 1 Matrix group.
Format
rmon matrix index <index-number> [port <port>] [owner <string>] [status
enable|disable]
Mode
Configure
Description
The Matrix group captures L2 traffic on a particular port between two hosts (a source
MAC and destination MAC address). The rmon matrix command sets various parameters
of the RMON 1 Matrix control table. If default tables were turned on for the Standard
group, an entry is created in the Matrix control table for each available port.
Note:
By default, ports on the SSR operate in address-bridging mode. The port must be
enabled in flow-bridging mode in order for layer 2 matrix information to be
captured.
Use the rmon show matrix command to display the matrix group and logs.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies a row in the Matrix table.
<port>
Specifies the port from which to collect data.
owner <string>
Specifies the owner of the event; for example, an IP address, machine name or
person’s name.
status enable|disable
Enables or disables this matrix. The default is enable.