Specifications

rmon history
700 SSR Command Line Interface Reference Manual
rmon history
Purpose
Configures the RMON 1 History group.
Format
rmon history index <index-number> port <port> [interval <seconds>] [owner <string>]
[samples <num>] [status enable|disable]
Mode
Configure
Description
The RMON History group periodically records samples of variables and stores them for
later retrieval. You use the rmon history command to specify the SSR port to collect data
from, the number of samples, the sampling interval, and the owner. If default tables were
turned on for the Lite group, an entry is created in the History control table for each
available port.
Use the rmon show history command to display the history data.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies an entry in the History table.
interval <seconds>
Specifies the sampling interval in seconds. This value must be between 1 and 3600,
inclusive. The default value is 1800.
owner <string>
Specifies the owner of the history resource; for example, an IP address, machine name
or person’s name.
port <port>
Specifies the port from which to collect data.