Specifications

rmon event
696 SSR Command Line Interface Reference Manual
rmon event
Purpose
Configures the RMON 1 Event group.
Format
rmon event index <index-number> type none|log|trap|both [community <string>]
[description <string>] [owner <string>] [status enable|disable]
Mode
Configure
Description
The Event group controls the generation and notification of events. The rmon event
command sets various parameters of the RMON 1 Event control table.
Use the rmon show event command to display the event data.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies an entry in the Event table.
community <string>
Specifies the SNMP community string to be sent with the trap. If an SNMP trap is to
be sent, it will go to the SNMP community specified in this string.
description <string>
Specifies a comment describing this event.
owner <string>
Specifies the owner of the event; for example, an IP address, machine name or
person’s name.
status enable|disable
Enables or disables this event. The default is enable.