Specifications

rmon channel
690 SSR Command Line Interface Reference Manual
failed Packets will be accepted only if they fail either the packet data match or
the packet status match of each of the associated filters.
data-control on|off
Specifies the flow control of the data:
on Implies data, status, and events flow through this channel.
off Implies data, status, and events will not flow through this channel.
turn-on-event-index <number>
Is a number between 0 and 65535 that identifies the event configured to turn the
associated data control from off to on.
turn-off-event-index <number>
Is a number between 0 and 65535 that identifies the event configured to turn the
associated data control from on to off.
event-index <number>
Is a number between 0 and 65535 that identifies the event configured to be generated
when the associated data control is on and a packet is matched.
channel-status ready|always-ready
Specifies the status:
ready A single event is generated.
always-ready Allows events to be generated at will.
description <string>
Describes this channel in a maximum of 127 bytes.
owner <string>
Specifies the owner of packet capture; for example, an IP address, machine name or
person’s name.
status enable|disable
Enables or disables this channel. The default is enable.
Restrictions
None.