Specifications

SSR Command Line Interface Reference Manual 687
rmon capture
rmon capture
Purpose
Configures the RMON 1 Packet Capture group.
Format
rmon capture index <index-number> channel-index <number> [full-action lock|wrap]
[slice-size <number>] [download-slice-size <number>] [download-offset <number>]
[max-octets <number>] [owner <string>] [status enable|disable]
Mode
Configure
Description
The Packet Capture group allows packets to be captured after they have flowed through a
channel. The rmon capture command sets various parameters of the RMON 1 Packet
Capture table.
Use the rmon show packet-capture command to display the Packet Capture table.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies a row in the Packet Capture
table.
channel-index <number>
Is a number between 1 and 65535 that identifies the channel that is the source of
packets. The default is 0.
full-action lock|wrap
Specifies the action of the buffer when it reaches the full status:
lock Stop capturing packets when the buffer reaches the full status.
wrap Wrap around when the buffer reaches the full status.