Specifications

rmon address-map
678 SSR Command Line Interface Reference Manual
rmon address-map
Purpose
Configures the RMON 2 Address Map group.
Format
rmon address-map index <index-number> port <port> [owner <string>] [status
enable|disable]
Mode
Configure
Description
The Address Map group maps MAC addresses to network address bindings that are
discovered by the SSR on a per-port basis. The rmon address-map command sets various
parameters of the RMON 2 Address Map table.
If the default tables were turned on for the Professional group, an entry in the Address
Map control table is created for each available port.
Use the rmon show address-map command to display the address map.
Parameters
<index-number>
Is a number between 1 and 65535 that uniquely identifies a row in the Address Map
table.
<port>
Specifies the port from which to collect data.
owner <string>
Specifies the owner of the event; for example, an IP address, machine name or
person’s name.
status enable|disable
Enables or disables this matrix. The default is enable.