Specifications

SSR Command Line Interface Reference Manual 675
Chapter 48
rmon Commands
The rmon commands let you display and set parameters for RMON statistics on a per-
port basis. RMON information corresponds to RFCs 1757 and 2021.
Command Summary
Table 35 lists the rmon commands. The sections following the table describe the command
syntax.
Table 35. rmon commands
rmon address-map index <index-number> port <port> [owner <string>] [status
enable|disable]
rmon al-matrix-top-n index <index-number> matrix-index <number> ratebase
terminal-packets|terminal-octets|all-packets|all-octets duration <number> size
<number> [owner <string>] [status enable|disable]
rmon alarm index <index-number> variable <string> [interval <seconds>] [falling-
event-index <num>] [falling-threshold <num>] [owner <string>] [rising-event-index
<num>] [rising-threshold <num>] [startup rising|falling|both] [status
enable|disable] [type absolute-value|delta-value]
rmon apply cli-filters <filter id>
rmon capture index <index-number> channel-index <number> [full-action lock|wrap]
[slice-size <number>] [download-slice-size <number>] [download-offset <number>]
[max-octets <number>] [owner <string>] [status enable|disable]
rmon channel index <index-number> port <port> [accept-type matched|failed] [data-
control on|off] [turn-on-event-index <number>] [turn-off-event-index <number>]
[event-index <number>] [channel-status ready|always-ready] [description <string>]
[owner <string>] [status enable|disable]