Specifications

SSR Command Line Interface Reference Manual 673
rip trace
receive Shows information about traced RIP packets received by the SSR.
send Shows information about traced RIP packets sent by the SSR.
Note: The default is to show both send and receive packets.
local-options Sets trace options for this protocol only. These trace options are inherited
from those set by the ip-router global set trace options command, or you
can override them here. Specify one or more of the following:
all Turns on all tracing.
general Turns on normal and route tracing.
state Traces state machine transitions in the protocols.
normal Traces normal protocol occurrences.
Note:Abnormal protocol occurrences are always traced.
policy Traces application of protocol and user-specified policies to
routes being imported and exported.
task Traces system processing associated with this protocol or peer.
timer Traces timer usage by this protocol or peer.
route Traces routing table changes for routes installed by this
protocol or peer.
Restrictions
None.