Specifications

rip trace
672 SSR Command Line Interface Reference Manual
rip trace
Purpose
Trace RIP packets.
Format
rip trace [packets|request|response|local-options] [detail | send|receive]
Mode
Configure
Description
The rip trace command traces the following sets of RIP packets:
• RIP request packets sent or received by the SSR
• RIP response packets sent or received by the SSR
Depending on the options you specify, you can trace all packets, request packets only, or
receive packets only. In addition, you can select to trace the request packets, receive
packets, or both that are sent by the SSR, received by the SSR, or all packets (both sent
packets and received packets).
Parameters
packets Traces all RIP packets, both request packets and response packets. This is the
default.
request Traces only request packets, such as REQUEST, POLL and POLLENTRY
packets.
response Traces only response packets.
For the packets, request, and response parameters, you can optionally specify
one of the following:
detail Shows detailed information about the traced packets.