Specifications

rip set interface
662 SSR Command Line Interface Reference Manual
rip set interface
Purpose
Set the RIP state, version, type of update messages, metric and authentication scheme
used for each interface running RIP.
Format
rip set interface <interfacename-or-IPaddr> | all
[advertise-classfull enable | disable ]
[receive-rip enable | disable]
[send-rip enable | disable]
[metric-in <num>]
[metric-out <num>]
[version 1|version 2 [type broadcast|multicast]]
[authentication-method none|(simple|md5
key-chain <num-or-string>)]
Mode
Configure
Description
The rip set interface command lets you set the following parameters for RIP interfaces:
• Whether the interface will accept RIP updates
• Whether the interface will send RIP updates
• The RIP version (RIP V1 or RIP V2)
• The packet type used for RIP V2 updates (broadcast or multicast)
• The metric added to incoming RIP updates
• The metric added to outgoing RIP updates