Specifications

SSR Command Line Interface Reference Manual 65
Chapter 2
acl-edit Commands
The acl-edit command activates the ACL Editor mode. The ACL Editor provides a user-
friendly interface for maintaining and manipulating rules in an ACL. Using the editor,
you can add, delete or re-order ACL rules. In addition, if the modified ACL is currently
applied to an interface, the ACL is automatically “re-applied” to the interface and takes
effect immediately. To edit an ACL, you enter the acl-edit command in Configure mode.
The command must also specify the name of the ACL you want to edit. Only one ACL can
be edited at one time.
Command Summary
Table 2 lists the commands available with the ACL Editor. The sections following the table
describe the command syntax.
Table 2. acl-edit commands
acl-edit <aclname>
acl permit|deny
delete <rule#>
exit
move <rule#> after <rule#>
save
show