Specifications

rdisc set address
642 SSR Command Line Interface Reference Manual
rdisc set address
Purpose
Configures router advertisement parameters that apply to a specific address.
Format
rdisc set address <ipaddr> type multicast|broadcast advertise enable|disable
preference <number> |ineligible
Mode
Configure
Description
The rdisc set address command lets you specify the type of router advertisement in which
the address is included and the preference of the address for use as a default route.
Parameters
<ipaddr>
Specifies the IP address.
type multicast|broadcast
Specifies the type of router advertisement in which the IP address is to be included:
multicast Specifies that the IP address should only be included in a multicast router
advertisement. This is the default.
broadcast Specifies that the IP address should only be included in a broadcast router
advertisement, even if IP multicast is available.
advertise enable|disable
Specifies whether the IP address is included in the router advertisements:
enable Include the IP address in router advertisements. This is the default.
disable Do not include the IP address in router advertisements.
preference <number>|ineligible
Specifies the degree of preference of the IP address as a default route. The higher the