Specifications

SSR Command Line Interface Reference Manual 607

qos show l2

Purpose

Show QoS information for L2 flows.

Format

qos show l2 all-destination all-flow ports <port-list> vlan <vlanID> source-mac

Mode

Enable

Description

The qos show l2 command lets you display QoS information for L2 flows. You can filter

the display according to the following:

• Destinations

•Flows

• Ports

•VLANs

• Source MAC addresses

• Destination MAC addresses

•Priority

Parameters

all-destination

Filters the display to show all the L2 destination priorities.

all-flow

Filters the display to show all the L2 flow priorities.

ports <port-list>

Filters the display to show L2 priority information for specific ports.