Specifications

SSR Command Line Interface Reference Manual 603
qos set weighted-fair
qos set weighted-fair
Purpose
Set percentages for weighted-fair queuing.
Format
qos set weighted-fair control <percentage> high <percentage> medium <percentage> low
<percentage> port <port list>|all-ports
Mode
Configure
Description
The qos set weighted-fair command lets you set the percentage of SSR bandwidth
allocated to the control, high, medium, and low priorities. The percentages apply to
specific ports or to all ports. Make sure the total percentages for all four priorities equals
100.
Parameters
control <percentage>
Specifies the percentage of SSR bandwidth allocated to the control priority. Specify a
number from 1 – 100. The default is 25.
high <percentage>
Specifies the percentage of SSR bandwidth allocated to the high priority. Specify a
number from 1 – 100. The default is 25.
medium <percentage>
Specifies the percentage of SSR bandwidth allocated to the medium priority. Specify a
number from 1 – 100. The default is 25.
low <percentage>
Specifies the percentage of SSR bandwidth allocated to the low priority. Specify a
number from 1 – 100. The default is 25.