Specifications

SSR Command Line Interface Reference Manual 597
qos set ipx
qos set ipx
Purpose
Set a priority for an IPX flow.
Format
qos set ipx <name> <priority> [<srcnet>|any] [<srcmask>|any] [<srcport>|any]
[<dstnet>|any] [<dstmask>|any] [<dstport>|any] [<interface-list>|any]
Mode
Configure
Description
The qos set ipx command lets you set the priority for an IPX flow based on the following
fields in the flow:
•Flow name
• Source network
• Source network mask
• Source port
• Destination network
• Destination network mask
• Destination port
You can set the priority of each field to control, low, medium, or high. The default is low.
Parameters
<name>
Specifies the IPX flow name.
<priority>
Specifies the priority you are assigning to the flow parameters you specified from the
list above. You can specify one of the following priorities: