Specifications

qos set ip
594 SSR Command Line Interface Reference Manual
qos set ip
Purpose
Set a priority for an IP flow.
Format
qos set ip <name> <priority> [<srcaddr/mask>|any]
[<dstaddr/mask>|any] [<srcport>|any] [<dstport>|any] [<tos>|any] [<interface-list>|any]
[<protocol>|any] [<tos-mask>|any] [<tos-precedence-rewrite>|any] [<tos-rewrite>|any]
Mode
Configure
Description
The qos set ip command sets the priority for an IP flow based on the following fields in
the flow:
•Flow name
• Source IP address and network mask
• Destination IP address and network mask
• Source port
• Destination port
•TOS
• Transport layer protocol (TCP or UDP)
You can set the priority of each field to control, low, medium, or high. The default is low.
Parameters
<name>
Specifies the IP flow name.