Specifications

qos precedence ipx
592 SSR Command Line Interface Reference Manual
qos precedence ipx
Purpose
Set the precedence of the IPX flow fields.
Format
qos precedence ipx [srcnet <num>] [srcnode <num>] [srcport <num>] [dstnet <num>]
[dstnode <num>] [dstport <num>] [intf <num>]
Mode
Configure
Description
The qos precedence ipx command lets you set the precedence of the following fields in
IPX flows.
• Source network
• Source port
•Source node
• Destination network
• Destination node
• Destination port
• Incoming interface
You can set the precedence of the following fields from 1 – 7. The precedence 1 has the
highest priority and 7 has the lowest. The default priorities are as follows:
• destination network (1)
• source network (2)
• destination node (3)
• source node (4)
• destination port (5)