Specifications

qos precedence ip
590 SSR Command Line Interface Reference Manual
qos precedence ip
Purpose
Set the precedence of the IP flow fields.
Format
qos precedence ip [sip <num>] [dip <num>] [srcport <num>] [destport <num>]
[tos <num>] [protocol <num>] [intf <num>]
Mode
Configure
Description
The qos precedence ip command lets you set the QoS precedence for various flow fields
in IP traffic. You can set a precedence from 1 – 7 for the following IP fields:
• IP source address
• IP destination address
• Source TCP or UDP port
• Destination TCP or UDP port
• Type of Service (TOS) for the packet
• Protocol (TCP or UDP)
• Incoming interface
The precedence 1 is the highest priority. IP interfaces or flow fields within IP packets that
have a precedence of 1 are given first priority. The default priorities are as follows:
• destination port (1)
• destination address (2)
• source port (3)
• source IP address (4)
•TOS (5)