Specifications

SSR Command Line Interface Reference Manual 583
pvst set bridging spanning-tree
priority <num>
Sets the STP bridging priority for the SSR. Specify a number from 0 – 65535. The
default is 32768
spanning-tree <string>
The name of the spanning-tree instance. This name is the same as the VLAN name.
Note: For default VLAN, use stp commands.
Restrictions
For PVST, the spanning tree instance must have previously been created.
Examples
To set the bridging priority of Spanning Tree for VLAN ip1 to 1:
ssr(config)# pvst set bridging priority 1 spanning-tree ip1