Specifications

pvst set bridging spanning-tree
582 SSR Command Line Interface Reference Manual
pvst set bridging spanning-tree
Purpose
Set STP bridging parameters for a particular VLAN.
Format
pvst set bridging [forward-delay <num>] [hello-time <num>] [max-age <num>]
[priority <num>] spanning-tree <string>
Mode
Configure
Description
The pvst set bridging spanning-tree command lets you configure the following STP
parameters for a particular VLAN:
•Bridging priority
•Hello time
•Maximum age
•Forward delay
Parameters
forward-delay <num>
Sets the STP forward delay for the SSR. The forward delay is measured in seconds.
Specify a number from 4– 30. The default is 15.
hello-time <num>
Sets the STP hello time for the SSR. The hello time is measured in seconds. Specify a
number from 1– 10. The default is 2.
max-age <num>
Sets the STP maximum age for the SSR. Specify a number from 6–40. The default is 20.