Specifications

SSR Command Line Interface Reference Manual 581

pvst enable port spanning-tree

Purpose

Enable PVST on one or more ports on a particular spanning tree.

Format

pvst enable port <port-list> spanning-tree <string>

Mode

Configure

Description

The pvst enable port command enables STP on the specified port for the specified

spanning tree.

Parameters

<port-list> The ports on which you are enabling STP. You can specify a single port or a

comma-separated list of ports. Example: et.1.3,et.(1-3).(4,6-8).

<string> The name of the spanning-tree instance. This name is the same as the VLAN

name.

Note:

For default VLAN, use stp commands.

Restrictions

For PVST, the spanning tree instance must have previously been created.