Specifications

acl permit|deny ipxtype20
58 SSR Command Line Interface Reference Manual
acl permit|deny ipxtype20
Purpose
Create an IPX type 20 ACL.
Format
acl <name> permit|deny ipxtype20
Mode
Configure
Description
The acl permit ipxtype20 and acl deny ipxtype20 commands define an ACL to allow or
block IPX type 20 packets from entering or leaving the SSR.
Parameters
<name> Name of this ACL. You can use a string of characters or a number.
Restrictions
When you apply an ACL to an interface, the SSR appends an implicit deny rule to that ACL.
The implicit deny rule denies all traffic. If you intend to allow all traffic that doesn’t
match your specified ACL rules to go through, you must explicitly define a rule to permit
all traffic.
Examples
To create an ACL to deny IPX type 20 packets:
ssr(config)# acl 100 deny ipxtype20