Specifications

ppp show stats
576 SSR Command Line Interface Reference Manual
ppp show stats
Purpose
Displays bridge NCP, IP NCP, and link-status parameters.
Format
ppp show stats port <port> [bridge-ncp] [ip-ncp] [link-status] [summary]
Mode
Enable
Description
The ppp show stats command allows you to display parameters for bridge NCP, IP NCP,
and link-status on PPP WAN ports. You can specify one, two, or three of the available
parameter types.
Parameters
<port> The PPP WAN port for which you wish to view bridge NCP, IP NCP,
and/or link-status parameters.
bridge-ncp Specifies that you wish to view bridging NCP parameters for the given
port.
ip-ncp Specifies that you wish to view IP NCP parameters for the given port.
link-status Specifies that you wish to view link-status parameters for the given port.
summary Specifies that you wish to view summarized display.
Restrictions
None.