Specifications

ppp set payload-encrypt
570 SSR Command Line Interface Reference Manual
ppp set payload-encrypt
Purpose
Enables packet encryption for PPP ports.
Format
ppp set payload-encrypt [type des-bis] transmit-key <key> receive-key <key> ports <port
list>
Mode
Configure
Description
The ppp set payload-encrypt command allows you to enable the encryption of packets
using the DES-bis algorithm. You can enable encryption on a single port, an entire
multilink PPP (MLP) bundle, or on individual ports that are members of an MLP bundle.
If this command is not configured, payload encryption is not enabled.
Parameters
type des-bis
Specifies the DES-bis encryption algorithm. This is the default.
<key>
Specifies a 16-digit hexadecimal number for the encoding and decoding of the
packets. The keys are themselves encrypted and stored in the active and startup
configurations.
<port list>
The port(s) on which you want to enable payload encryption. You can specify a single
port or a comma-separated list of ports.
Restrictions
Usage is restricted to PPP WAN ports only.